QLD owned and operated! FREE SHIPPING ON ORDERS OVER $70! Buy now, Pay later! Payitlater now available!
Muzzletek M+ Pistol/Rifle Hopup
Muzzletek M+ Pistol/Rifle Hopup
Muzzletek M+ Pistol/Rifle Hopup
Muzzletek M+ Pistol/Rifle Hopup
Muzzletek M+ Pistol/Rifle Hopup
Muzzletek M+ Pistol/Rifle Hopup

    Muzzletek M+ Pistol/Rifle Hopup

    $60.00 $75.00
      DESCRIPTION

      Forget special glow mags! The Muzzletek M+ comes with an adapter on the front of the hopup so you can attach an Acetech tracer unit!

      Made with a CNC alloy outer casing, this hopup is tough and will add that much needed distance to your new co2 pistol as well as your M4 or AK using the included adaptor! Designed and made in Australia! 

      Hopup Material: CNC alloy outer case with plastic inner

      Adaptor Material: CNC alloy

      Thread of main hopup: M12 CCW

      Thread of adaptor: M14 CCW

      Adjustment: Adjust through grub screw on the front of the hopup

      Please note the Muzzletek Hop up does not suit the APS ACP (Glock Style) Frame or the Bumblebee Pistol as the outer barrel is different.

      Replacement Hop up Inserts are available separately see options

      Installation:

      Pistol

      1. Screw on the outer casing first (counter clockwise thread) all the way until it is on the pistol firmly
      2. Insert the inner hopup part into the casing making sure the hopup tongue is top dead centre
      3. Tighten up the grub screw in the rear of the casing until it becomes firm. This holds the inner hopup part in place.
      4. Adjust the amount of hopup by screwing in or out the hopup adjustment grub screw at the front of the hopup until you have the correct amount of backspin
      5. Install the tracer adapter if required then screw on your Acetech tracer unit

      M4/AK

      1. Screw the hopup onto the adaptor
      2. Screw assembly onto your blaster until tight then screw in grub screw that is on the side of the adaptor
      3. Insert the inner hopup part into the casing making sure the hopup tongue is top dead centre
      4. Tighten up the grub screw in the rear of the casing until it becomes firm. This holds the inner hopup part in place.
      5. Adjust the amount of hopup by screwing in or out the hopup adjustment grub screw at the front of the hopup until you have the correct amount of backspin
      6. Install the tracer adapter if required then screw on your Acetech tracer unit

      Please note these are different fitment to our first generation of Muzzletek and these will also require modification to fit on our first shipment of APS Pistols that we have sold from June to August 2020. The current Pistols sold from September 2020 do not require modification

      *Acetech Tracer unit sold seperately