Description
How does a perfect seal and no tappet plate or return spring sound?
Well to Aztech Innovations it sounded pretty dam amazing. So we designed and build it. A tappet less cylinder head that works!!
Here it is,the APACHE! The first of its kind in the world, all air controlled driven by the piston.
-No mechanical forks or prongs to retract the nozzles,
-No timing issues,
-No broken return springs,
-No broken tappet plates and best of all no fps droop on high rate of fire.
The all in one sealed cylinder head ensures perfect seal for max air flow and zero air loss with out any mechanical gear driven parts to create issues.
The APACHE produces extremely consistenthigh pressure air flow seen as ahuge improvement in consistency of feet per second plus a noticeable improvement in accuracy thanks to reduced turbulence of the airflow through the tri port and past the aerodynamic “boat tail” internal nozzle, combined these streamline the airflow into the barrel and behind the gel, pushingthe gel in a single uniform flow for max power.
Please note,using an APACHE DOES NOT increase the volume of your cylinder. The APACHE doesn’t open be able to increase volume, it opens when cylinder pressure increases through the piston moving forward, then the air moves from the Cylinder forward into the APACHE, the volume doesn’t increase as it opens it moves.
To prevent risking damaging the APACHE nozzle we suggest do not fire the apache with the upper receiveroff.
Benefits
- No timing issues… ever!
- Improved accuracy!
- Max efficiency, max range, less turbulent flight.
- Unique sound – everyone will know you are running an APACHE
- No more broken return springs
- No FPS loss from semi to auto modes
- Adjustable nozzle length (4mm of adjustment) using spacers
- Tappet plate and return spring no longer required
- Includesless strong 0.8mminternal spring, 2mm and 3mm sorbo pads
Tested and proven to feedperfectly with zero fps drop comparing semi auto to full auto all the way up to 85 rps on DSG and well over 500 fps on SSG.
The APACHE is a hi tech little pieceof kit, we highly recommendonly experienced AEG builders tackle an installand setup. The theory is very similar to HPA for tuning and airflow. The process is definitelymade easier with the Aztech Adjustable T piece to assist in setting the seal of the nozzle to the t piece while allowing for perfect feeding from the magazine.
APACHE comes with 2 springs, the0.9mm spring is installed from new,you may need to change this to the spare 0.8mm spring in the box.
We recommendonly using Ausgel Elite or AKA Extra Hard gels, softer gels and older gels will not be able to handle the high nozzle speed of the APACHE.
We also recommend a low strength loctite on the cap thread when you finally install it to ensure the top cap does not unscrew under high vibration environment.
-The body is made completely of 7075 CNC aluminum
-Nozzle made from CNC 7075 Aluminum
-All seals are Nitrile 70 duro rubber.
-Custom made 70 duro rubber tip.
-Anodized finish or raw machined finish
-Spare rubber tip
-2x internal spring, 1 light weight and one heavy weight
Unboxing
Installation
Spare parts are also available Our most common settings, your may vary, but the listing below should get you close
-Aztech Scythe CNCAztech Adjustable T piece 1 full turn with 3x O rings on APACHE
-APS Silveredge V2Aztech Adjustable T piece1 full turn with 3x O rings on APACHE
-CYMA V2- OriginalT piecewith 2x O rings on APACHE
-Wells V2 -OriginalT piecewith 2x O rings on APACHE
-Retroarms CNC V2 Universal Red Alloy or Aztech AdjustableTpiece
-War Interest V2 – Universal Red Alloyor Aztech AdjustableTpiece
-LDT LDX Split box V2 -OriginalLDTwith 2x O rings on APACHE orAztech AdjustableTpiece
-Classic Army V2 -OriginalT piecewith 2x O rings on APACHE
-MK Engineering CNC V2 please note the MK Hybrid92only suits APACHE with a spacer to suit the large t piece locator holein the front of the gearbox. Same for gen 9.
-MK Engineering CNC Modular V2
APS V3
– V3 We have a new extra long rubber tip to allow the use of the Standard APACHE and nozzle in APS, LDT and other V3 gearboxes.
The below applications will require a universal t-pieceand potential modifications for alignment and fitment
-SLR -may require different outer barrel adapterand T piece
-Gen 8, 9 and gen10 JinMing gearbox – yet to be determined.
-Red Dragon (XYL ARP9)- may require different outer barrel adapterand Tpiece
Liam Doorley –
You would be crazy to use anything else. It’s in a class of its own
Todd Murray –
Best thing yet in the game .awesome
Zane Makela –
Amazing innovation
Kale Zerafa –
I havent got to use it yet unfortunately my lassic army nemisis x9 mosfet has stopped working just as i received it and im having trouble findinh a replacement
Customer –
The best upgrade to any blaster
Greg –
Awesome! Do I need to say anymore 🤘
Lewis Benbow –
For my MilSim rig, the APACHE is a must. Feeding of gels is a breeze & consistency is through the roof. Makes a huge difference to reliability as well as my confidence that my blaster won’t break a return spring or wear the tappet plate at the worst moment. Highly recommend.
Andrew Mitchell –
Gives a certain crack that is unique! Stings and handles fast bursts without FPS drop!
Scott Mason –
Awsome staff super helpful wuth a ton of info
John Solomon –
Finally an answer to feeding and broken spring issues! I’m going to do the same to my other Blaster now. Great product, don’t know why I didn’t do this sooner.
Ben Tewes –
Springy
Andrew Sorbie –
Bought 2 APACHE but i need to get more for all of my blasters
David Went –
All of my blaster mates got one for their rigs and we installed them at the same time and the results were noticable from the first tests. No fps loss in full auto.
Drew Murray –
I was going to use the aztech trigger instead but just glued some double sided tape onto the top of the trigger so it’s a really short pull
Franc Rebernik –
I’ve owned, used and loved every version of the Apache and the incarnation is the best yet. Throw your Tappet Plates out and grab yourself an Apache.
Joshua Martin –
This is the best tappet plateless system thus far. The thread in the top enables you to get the perfect distance for the nozzle. Blaster pops much sharper now.
Drew Murray –
I haven’t used them yet but got a couple anyway
Joel MacGregor –
Amazing product that’s slightly let down by the front cap removal tool being very weak.
Drew Murray –
Thought i would grab some spares while available
rosemary doolan –
Good
Franc Rebernik –
I’m a huge fan of the Apache and the One Piece Nozzles make it breeze when when servicing or changing Blaster configurations.
Working out the length required for your build via the included o-rings and nozzle tip is extremely simple.
Paula Toms –
Put the AZTECH AIR PRESSURE ACTIVATED CYLINDER HEAD in a Nolan Wells young fella loves it
Franc Rebernik –
And another Apache to the collection.
Throw out your tappet plates, and join the revolution! LOL
Arneil Damon –
Perfect fit no modification. The sound was awesome too!! Thanks!
John Paterson –
I have 9 so that says something
Matthew Parsey –
Fast post and quality items 👌
Chun Kit To –
Works in a Gen8 gearbox (need to use 5 o-rings and a Gen8 nozzle cap) with a 13:1 set. Now my Gen8 416c is punching hard without tappet plate timing concern. Thank you very much for this great innovation!
Bill sewell –
Unreal people to deal with very quick postage
Mervan cowan –
Very good easy to setup
Josh –
Bought to experiment with the CYMA scar. I was able to play with different Nozzles to get the right fit. FYI to use in CYMA scar, you will need to fatten out the Nozzle tip with a bit of heat shrink, otherwise you won’t get a great seal if left without.
Felipe Garcia –
Easy to install great quality
Duncan –
Love these things! Tappetless FTW. Feeds perfectly, shoots straight and hard with the Apache!!! Went in a M4 well cqb build – 3 o rings
Louie John Bano –
Good choice to replace cylinder head to a tappetless.
phillip fraser –
installed to your blaster , tune up this Lil product will run for 40000 shots before you even look at an o’ring change like it a lot have two of the in 2 different setup’s, Lazer gel beams on the fields
Corey Hopkins –
I was originally dreading installing this, but after actually getting one in my hands and watching the installation video a couple times I came to the realisation that it’s quite simple and they work incredibly well so if you’re gonna get one get one they rock.
Richard Broadfield –
I wasn’t disappointed, the Apache sounds and shoots like beast 🙂
Jeffrey Johnson –
Being able to maintain my blaster with locally owned business is the 👌
Matthew Parsey –
Perfect for my ARP build
Steve Lucey –
Excellent quality and my brushless motor doesn’t mis a beat firing at 440fps and at 48gels per sec. Insanely fast and no double feeding or misfiring so impressive
Adrien Valenzuela –
Excellent product! The Apache V2 nozzle is a huge upgrade over having to worry about tappet plates and Gear delayer chips!
Alex Dus –
Works great!
Alex Dus –
10-Oct
James Cameron –
Perfect tip. Love that there’s parts for the V2.5
James Cameron –
Fitted to my E&C416 and seals much plusher with both the factory and Aztec adjustable tee piece 👍
colin duffy –
The threads that hold the removable front ventilation plate broke, and now it won’t hold itself together. also the airsoft nozzle doesn’t fit the new design. great idea flawed execution.
Anthony Vasington –
The Apache is the ultimate engineering when it comes to tight air compression.. and these guys haves nailed it.. super air tight and accurate pin point shooting.. AAA++++++++