APS CUSTOM MPX UPGRADED AZTECH SCYTHE W/DROP STOCK 315FPS

MPXs are the way to go for tight playing fields, A CQB players wet dream with the extra room for the full face mask thanks to the all aluminum adjustable angle CNC drop stock adaptor !!!

https://www.azraelsarmoury.com/collections/custom/products/aps-mpx-upgraded-aztech-scythe-w-drop-stock-315fps

This gorgeous drop stock MPX is running 315 fps at 34 rounds per second with insane trigger response thank to the Aztech Gate Aster specific Xtreme adjustable trigger.

This build requires a high quality 11.1v battery with a high discharge rate. This blaster will not run on low quality batteries. Recommended to use our eYou batteries and Imax charger as per below. We can change both the terminal below to suit Deans plug

https://www.azraelsarmoury.com/collections/battery/products/eyou-11-1v-3s-1-200mah-45c-battery

https://www.azraelsarmoury.com/collections/battery/products/i

Upgrades pre installed include:

-Aztech Scythe CNC gear box
-Aztech APACHE Tappetless cylinder head
-Aztech Xtreme adjustable trigger
-Aztech CNC Drop stock adaptor
-Aztech Polymer piston & CNC head with Viton O ring
-Aztech stainless bushes
-Aztech V2 spring kit
-Gate Aster optical Mosfet with Link cable
-Aztech 7.25mm stainless barrel
-SHS High Torque 30k Brushed Motor
-SHS 12:1 Ratio hardened gears
-SHS M130 spring
-SHS Anti reverse latch
-60% ported cylinder
-Deans T Plug
-Gears Shimmed and Piston Angle of engagement set closer to 12 o'clock.

PLEASE NOTE: this blaster has been upgraded, which means we have opened the receiver and taken it apart. As a result you may find the take down pins, nuts bolts and screws may have some paint worn off, wear or marks showing on or around the receiver from handling and being worked on as a result of using tools to work on the blaster. While we take every care we can to try and keep the blaster in as new condition, marks are inevitable when opening a blaster